Mitutoyo

Product Image (570)

Digital Height Gauge

Price: 22500 INR/Box

MITUTOYO SINGLE COLUMN 0.01MM 570-312 : 0-300 570-313 : 0-450 570-314 : 0-600 This Digimatic height gauge is very precise and reliable, and offers you the following benefits: Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur. It comes with large and smooth-acting slider hand wheel A carbide-tipped scriber is provided. SPC data output.

Product Image (513)

Dial Test Indicator

Price: 4130 INR

This is a small type Dial Test Indicator (Lever Type) which offers you the following benefits: Reversible measuring direction (clutch type) Jeweled bearings assure higher sensitivity and accuracy.

Product Image (2046)

Dial Indicator

Price: 1610 INR

This is a standard, metric dial indicator. It offers you the following benefits: Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed and removed without tools. No through screw holes on the frame and secure adhesion between the bezel and the crystal as well as the use of an O-ring prevents water or oil penetration.

Product Image (511)

Bore Gauge

Price: 155 INR

These are bore gauges that automatically self-centre via a centring bridge. They offer you the following benefits: A long plunger stroke gives you amazing accuracy. Interchangeable washers 0.5mm thick are supplied as standard accessories, so you can enable setting in small steps. Contact points are carbide (>18 mm range), giving you high durability and wear resistance. A large grip reduces heat transfer from the operator by 50%.

Product Image (527)

Depth Vernier Caliper

Price: 5446 INR

This vernier depth gauge offers you the following benefits: Its base and measuring faces are hardened and micro-lapped for robustness. Fine adjustment models available

Product Image (192)

Dial Height Gauge

Price: 5000 INR/Unit

This Dial Height Gauge offers you the following benefits: 1. It allows you easy and error-free reading with both up and down digital counters as well as a dial. 2. It comes with a hand wheel so you can easily make rough adjustments. 3. A carbide-tipped scriber is provided.

Product Image (104)

Adjustable Outside Micrometer ( Interchangeable )

Price: 6376 INR/Unit

This Outside Micrometer offers you an extra wide measuring range and presents you with the following benefits: 1. Easy, interchangeable anvils allow a wide range of measurements. 2. Ratchet stop delivers a constant measuring force.

Product Image (7010)

Magnetic Stand

Price: 1440 INR

V-block base type.

Product Image (103)

Outside Micrometer

Price: 2000 INR/Unit

Lightweight workshop design with baked-enamel-finished frame. Equipped with Ratchet Stop for constant measuring force.

Product Image (293)

Digimatic Micrometer

Price: 7200 INR

This Standard Digimatic Micrometer is an affordable device that offers the following benefits: It is cost-effective with simplified functionality for standard applications. Extraordinary battery life of 2,4 years. Without data output. Constant measuring force

Product Image (123)

Disk / Gear Tooth Micrometer

Price: 5000 INR

Measuring the over-pin diameter of gears . It has interchangeable steel or carbide ball inserts (optional accessory) that allow you to measure modules sized between 0.5-5.25 mm.

Product Image (7301)

Dial Thickness Gauge

Price: 3060 INR/Unit

This Dial Indicator Thickness Gauge enables you to measure tube wall thickness, film/paper etc. with flat contact points, resp. lens thickness or groove depth.

Product Image (154-902)

Hole Gauge

Price: 3294 INR/Unit
  • Usage:For Laboratory Use
  • Color:Silver
  • Product Type:Hole Gauge
  • Width:10-50 Millimeter (mm)
  • Material:Stainless Steel
  • Delivery Time:1-7 Week
  • Supply Ability:1 Per Day
Product Image (186)

Radius Gauge

Price: 275 INR

Radius size is stamped on each gage leaf. Each leaf comprises an internal and an external radius gage of the same size. With locking clamp. Each gage has five measuring locations.

Product Image (514)

Height Gauge

Price: 17860 INR

This vernier height gauge offers you the following benefits: You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales. A carbide-tipped scriber is provided.

Product Image (201)

Dial Snap Gauge

Price: 16665 INR/Unit

These Dial Snap Gauges are designed to let you quickly carry out GO/NG judgement of the diameters of cylinders and shafts in machining processes. They offer the following benefits: Wide, flat carbide anvils. 2mm anvil retracting stroke. You can adjust the measuring range with an adjustment nut.

Product Image (505)

Dial Vernier Caliper (LC 0.01 MM)

Price: 4650 INR/Unit

This metric dial caliper allows you to take reliable measurements and offers you the following benefits: 1. Ultra-smooth sliding and high shock protection 2. Easy to read dial with large character height

Product Image (SJ210)

Surface Roughness Tester

Price: 56000 INR

This is a portable measuring instrument that allows you to easily and accurately measure surface roughness. The Surftest SJ-210 offers you the following benefits: Skid system gives you user friendly and intuitive menu navigation. It works independently of mains power, allowing you to make on-site measurements. The 6.0 cm [2.4“] colour graphic, back-lit LCD gives you excellent readability. It performs roughness analyses conform to various international standards (EN ISO, VDA, ANSI, JIS) and customized settings. Different drivers expanding the range of applications. Calculation results, assessed profiles, bearing and amplitude curves can be displayed. Support of 21 languages. Operation by keys on the front and under the sliding cover.

Product Image (187)

Bevel Protractor

Price: 15142 INR

This universal bevel protector offers you the following benefits: Its high-precision angle gauge enables you to take accurate angle measurements of machines, moulds and jigs. You can attach it to height gauges.

Product Image (126-125)

Screw Thread Micrometer

Price: 2621 INR

This Screw Thread Micrometer should be used with optional, interchangeable, anvils/spindle-tips that allow you to measure a wide range of metric/unified and Whitworth screw-thread pitch diameters. A metric (unified) 60º setting standard is included with all models except those measuring range from 0-25 mm.

Product Image (155-905)

Telescopic Gauge

Price: 7970 INR

Self-centering and satin chrome finish. Constant spring force on to the measuring surface. Locked in position by knurled lockscrew.

Product Image (155-905)

Telescopic Gauge

Price: 7970 INR

Self-centering and satin chrome finish. Constant spring force on to the measuring surface. Locked in position by knurled lockscrew.

Product Image (368)

Hole Test or Three Point Micrometer

Price: 50828 INR
  • Usage:For Laboratory Use
  • Color:Silver
  • Material:Stainless Steel
  • Width:10-50 Millimeter (mm)
  • Product Type:Hole Test or Three Point Micrometer
  • Delivery Time:1-7 Week
  • Supply Ability:1 Per Day
Product Image (137)

Tubular Inside Micrometer

Price: 4002 INR

This is an extension rod type inside micrometer that offers you the following benefits: Interchangeable extensions with cylindrical gage rods are spring-mounted in protective sleeves so you can extend the measuring range. Carbide measuring faces are available.

Product Image (543)

Digimatic Dial Gauge

Price: 6140 INR

This is a multifunction indicator that is reliable and easy to use. The ABSOLUTE Digimatic Indicator ID-C offers you the following benefits: The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. GO/±NG judgement is performed by setting the upper and lower tolerances. You can make simple calculations by a user-definable factor using the formula Ax (‚x‘ is spindle displacement). Large character height of 11mm provides good readability. Display 330° rotatable. A function lock protects the display against unauthorised use.

Product Image (345)

Digimatic Inside Micrometer

Price: 27796 INR

The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits: Carbide measuring faces A setting standard (optional) is needed to accurately set the micrometer to the reference point.

Product Image (188)

Screw Pitch Gauge

Price: 325 INR

Thread pitch is stamped on each gage. Metric, Unified, and Whitworth screw pitch gages.

Product Image (516)

Slip Gauge

Price: 90680 INR
  • Delivery Time:1-7 Week
  • Supply Ability:1 Per Day
  • Product Type:Slip Gauge
  • Width:10-50 Millimeter (mm)
  • Material:Stainless Steel
  • Color:Red And Grey
  • Usage:For Laboratory Use
Product Image (193)

Counter Micrometer

Price: 5959 INR

This Digit Outside Micrometer comes with a mechanical counter and offers you the following benefits: Mechanical Digit counter Quick and error-free reading

Product Image (570)

Digimatic Height Gauge

Price: 26211 INR

This Digimatic height gauge is very precise and reliable, and offers you the following benefits: Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur. It comes with large and smooth-acting slider hand wheel A carbide-tipped scriber is provided. SPC data output.

Product Image (184)

Feeler Gauge

Price: 250 INR

This feeler gauge is ideal for a variety of measuring tasks and offers you the following benefits: Size clearly stamped on each leaf Leaves are easy to remove and can be individually locked open.

Product Image (160)

Vernier caliper

Price: 3800 INR

These vernier calipers with nib style jaws come with or without fine adjustment. They offer you the following benefits: For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths. Main scale and vernier scale satin chrome finish gives you high readability.

Product Image (345)

Digimatic Inside Micrometer

Price: 27796 INR

The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits: Carbide measuring faces A setting standard (optional) is needed to accurately set the micrometer to the reference point.

Product Image (960)

Precision Level

Price: 1000 Onwards INR/Unit

For use in setting machined surfaces precisely horizontal

Product Image (112)

Point Micrometer

Price: 4200 INR

This Point Micrometer features a pointed anvil and spindle, and offers the following benefits: 1. Its pointed anvil and spindle has a choice of included angle, ending in small-radius contact points. 2. You can use it to measure grooves, steps and similar.

Product Image (145)

Caliper Jaw Inside Micrometer

Price: 5200 INR/Unit

The Caliper Jaw Inside Micrometer offers you the following benefits: 1. Carbide measuring faces 2. A setting standard (optional) is needed to accurately set the micrometer to the reference point.

Product Image (209)

Inside Dial Caliper

Price: 12698 INR
  • Supply Ability:1 Per Day
  • Delivery Time:1-7 Week
  • Color:Black And Yellow
  • Width:10-50 Millimeter (mm)
  • Material:Stainless Steel
  • Product Type:Inside Dial Caliper
  • Usage:For Laboratory Use
Product Image (158)

Optical Flats

Price: 11690 INR

These optical flats are an essential tool for you to test the flatness of reflective surfaces such as gauge blocks and setting standards, through optical interference technology.

Product Image (02)

Price list of Mitutoyo

Price: 5850 INR/Unit
  • Supply Ability:1 Per Day
  • Delivery Time:1-7 Week
  • Display Type:Analog And Digital
  • Color:Silver
  • Material:SS & MS
  • Product Type:Price list of Mitutoyo
  • Usage:For Laboratory Use
Product Image (01)

Prices List of Mitutoyo

Price: 2950 INR/Unit
  • Supply Ability:1 Per Day
  • Delivery Time:1-7 Week
  • Usage:For Laboratory Use
  • Display Type:Analog And Digital
  • Size:40 L x 35 H x 45 W MM
  • Color:Silver
  • Material:Stainless Steel
  • Product Type:Prices List of Mitutoyo
X


Back to top